A bibliometric research based on hotspots and frontier trends of denosumab.

Denosumab is a monoclonal antibody that targets and inhibits the osteoclast activating factor receptor activator for nuclear factor-κB ligand (RANKL). It has been widely used in the treatment of osteoporosis, giant cell tumors of bone, and in the prevention of malignant skeletal-related events (SREs). We collected the research results and related MeSH terms of denosumab from 2011 to 2021 through the Web of Science and PubMed, respectively. The literature was visualized and analyzed by CiteSpace and bibliometric online analysis platforms. The MeSH terms were biclustered using the Bibliographic Co-Occurrence Analysis System (BICOMB) and graph clustering toolkit (gCLUTO). The results show that the number of denosumab-related annual publications had increased from 51 to 215, with the United States leading and Amgen Inc. being the most influential in the past 10 years. Articles published in the Journal of Bone and Mineral Research had the highest total citations. Three scholars from Shinshu University in Matsumoto, Yukio Nakamura, Takako Suzuki, and Hiroyuki Kato, joined the field relatively late but produced the most. The clinical comparison and combination of denosumab with other drugs in the treatment of osteoporosis was the most significant focus of research. Drug withdrawal rebound and management strategies have gained more attention and controversy recently. MeSH analysis revealed eight major categories of research hotspots. Among them, exploring the multiple roles of the RANK-RANKL-OPG system in tumor progression, metastasis, and other diseases is the potential direction of future mechanism research. It is a valuable surgical topic to optimize the perioperative drug administration strategy for internal spinal fixation and orthopedic prosthesis implantation. Taken together, the advantages of denosumab were broad and cost-effective. However, there were still problems such as osteonecrosis of the jaw, severe hypocalcemia, a high recurrence rate of giant cells in the treatment of bone and individual sarcoidosis, and atypical femoral fractures, which need to be adequately solved.

Learning Curve and Initial Outcomes of Full-Endoscopic Posterior Lumbar Interbody Fusion.

Study Design: This was a retrospective cohort study. Objective: We evaluated the feasibility, safety, and accuracy of full-endoscopic posterior lumbar interbody fusion (FE-PLIF) by assessing the learning curve and initial clinical outcomes. Summary of Background Data: Low back pain is one of the crucial medical conditions worldwide. FE-PLIF has been reported to be a minimally invasive method to treat mechanical low back pain, but there lacks a thorough evaluation on this new technique. Methods: The patients were divided into three groups in the order of operating date, implying that Group A consisted of the initial 12 cases, Group B the subsequent 12 cases, and Group C the last 12 cases. The data of patients were reviewed for gender, age, preoperative symptoms, satisfaction, as well as clinical outcomes demonstrated by visual analog scale (VAS). The operative time and intraoperative fluoroscopy were recorded to demonstrate the learning curve and the extent of radiographic exposure. Statistical significance was set at a p < 0.05 (two-sided). Results: The patients enrolled in this study were followed up at an average of 1.41 ± 0.24 years. Overall, patients were satisfied with the surgery. The average number of intraoperative fluoroscopy was 6.97 ± 0.74. A significant improvement was observed in the VAS of both lumbar pain and leg pain. The overall fusion rate was 77.7%. Complications were reported in two patients in Group A, one in Group B, and none in Group C. The average operative time showed a trend of gradual decline. The learning curve was characterized using a cubic regression analysis as y = -27.07x + 1.42x2-0.24x3 + 521.84 (R 2 = 0.617, p = 0.000). Conclusions: FE-PLIF is an effective and safe method for treating low back pain caused by short-segmental degenerative diseases. The learning curve of this technique is steep at the initial stage but acceptable and shows great potential for improvement.

Matrix Metalloproteinases in Relation to Bone Mineral Density: A Two-Sample Mendelian Randomization Study.

Background: We aimed at investigating causal associations between matrix metalloproteinases (MMPs) and bone mineral density (BMD) by the Mendelian randomization (MR) analysis. Methods: From genome-wide association studies of European ancestry, we selected instrumental variables for MMP-1, MMP-3, MMP-7, MMP-8, MMP-10, and MMP-12. Accordingly, we retrieved summary statistics of three site-specific BMD, namely, forearm, femoral neck, and lumbar spine. We conducted an inverse variance weighted MR as the primary method to compute overall effects from multiple instruments, while additional MR approaches and sensitivity analyses were implemented. Bonferroni-adjusted significance threshold was set at p < 0.05/18 = 0.003. Results: Totally, there was no evidence for causal effects of genetically-predicted levels of MMPs on BMD measurement at three common sites. MR results indicated that there were no causal associations of circulating MMPs with forearm BMD (all p ≥ 0.023) by the inverse variance weighted method. Similarly, there were no causal effects of MMPs on femoral neck BMD (all p ≥ 0.120) and MR results did not support causal relationships between MMPs and lumbar spine BMD (all p ≥ 0.017). Multiple sensitivity analyses suggested the robustness of MR results, which were less likely to be biased by unbalanced pleiotropy or evident heterogeneity. Conclusion: We found no evidence for the causal relationship between MMPs and BMD in the European population.

Research trends of platelet-rich plasma application in orthopaedics from 2002 to 2020: a bibliometric analysis.

BACKGROUND: Platelet-rich plasma (PRP) has been widely used to treat various orthopaedic diseases, and there are a large number of studies on the matter. However, there have been no bibliometric reports on the publications in this field. Bibliometrics is an excellent method to systematically evaluate the current research status of a specific field. In this study, CiteSpace 5.7.R2 software was used to analyse the status, hotspots, and frontiers of PRP in the treatment of orthopaedic diseases in the past 19 years. METHODS: All articles about the application of PRP in orthopaedics from 2002 to 2020 were searched from the Web of Science Core Collection. The author, country, institution, journal, cited journal, and keywords were retrieved, and the bibliometric analysis was done in CiteSpace 5.7.R2. RESULTS: A total of 321 articles were retrieved. The analysis showed that the number of publications increased in the past 19 years, and the most productive author in this field was Brian J. Cole. The most productive country and the most productive institution were the US and the Hospital for Special Surgery in New York, respectively. The journals with the highest output and the highest citation frequency were the Journal of Orthopaedic Research and the American Journal of Sports Medicine, respectively. From the keyword analysis, we observed that the primary research hotspots were the study of the PRP composition, growth factors, and the combination of PRP and mesenchymal stem cells. The frontiers of PRP were in vivo experiments, the treatment of rotator cuff and cartilage injury, and the comparison of clinical efficacy between PRP and hyaluronic acid. CONCLUSION: The efficacy of PRP in treating orthopaedic diseases remains controversial. There are still some problems with the experimental methods, such as insufficient sample size, low level of evidence, confusion of system naming, lack of standardisation of preparation methods and application programs, and lack of in-depth basic scientific research. The research status shown by co-occurrence and cluster maps and the analysis of hotspots and frontiers may help solve present problems and explore new directions.

A retrospective study on the clinical outcomes of all-ceramic crowns restoration fabricated by oral digital impression / 口腔疾病防治

Objective @#To evaluate the clinical outcomes of all-ceramic crowns whose oral digital impressions were scanned by 3Shape Trios. @*Methods @#All the impressions were scanned by Trios and all the crowns were fabricated according to the standard procedure. The restoration quality were evaluated using modified United States Public Health Service (USPHS) criteria one year after treatment. Restoration integrity、 marginal adaptation、enamel wear、 color satisfaction and gingival index (GI) of the prostheses were evaluated according to the modified USPHS criteria. @*Results@#The clinical 1 year survival rate of 92 porcelain crowns fabricated by 3-shape Trios digital impression and made by CAD/CAM was 100%. The scored A rates of restoration integrity、 marginal adaptation、 enamel wear、 secondary caries、color satisfaction and gingival index of the prostheses were 100%、91.3%、 98%、95.6%、96.7% and 94.7% after 1 year, respectively.@*Conclusion@#The clinical outcomes of all-ceramic crowns whose oral digital impressions were scanned by 3Shape Trios and whose crowns were made by CAD-CAM are satisfying.

A retrospective study on the clinical outcomes of all-ceramic crowns restoration fabricated by oral digital impression / 口腔疾病防治

Objective @#To evaluate the clinical outcomes of all-ceramic crowns whose oral digital impressions were scanned by 3Shape Trios. @*Methods @#All the impressions were scanned by Trios and all the crowns were fabricated according to the standard procedure. The restoration quality were evaluated using modified United States Public Health Service (USPHS) criteria one year after treatment. Restoration integrity、 marginal adaptation、enamel wear、 color satisfaction and gingival index (GI) of the prostheses were evaluated according to the modified USPHS criteria. @*Results@#The clinical 1 year survival rate of 92 porcelain crowns fabricated by 3-shape Trios digital impression and made by CAD/CAM was 100%. The scored A rates of restoration integrity、 marginal adaptation、 enamel wear、 secondary caries、color satisfaction and gingival index of the prostheses were 100%、91.3%、 98%、95.6%、96.7% and 94.7% after 1 year, respectively.@*Conclusion@#The clinical outcomes of all-ceramic crowns whose oral digital impressions were scanned by 3Shape Trios and whose crowns were made by CAD-CAM are satisfying.